Thumb Book Page Holder - Cat, Owl and Ghost
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cat, owl and ghost thumb rings that hold both pages of an open book flat while you read.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slip your thumb through the ring and the two wings hold both pages of an open book flat. Three shapes so you can pick the one that sits best in your hand.
WHAT YOU GET
• Basparmak_Kitap_Tutacagi_Kedi.stl -- cat
• Basparmak_Kitap_Tutacagi_Baykus.stl -- owl
• Basparmak_Kitap_Tutacagi_Hayalet.stl -- ghost
• 00_Tum_Parcalar_Baski_Tablasi.stl -- all three on one plate
KEY DIMENSIONS (mm)
• Thumb hole: 21.6 dia
• Page wing span: approx. 90
• Thickness: 4.2
PRINT SETTINGS
• PLA or PETG, 0.16-0.20 mm layers
• Flat on the plate, no supports; sand the edges lightly for comfort
ASSEMBLY
Put your thumb through the centre hole and press the two wings onto the left and right pages of the open book.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.