Terraforming Mars Resource Token Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stores in the box with a snug lid, pulls off and you're ready to begin your game. This began with the tray from…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Stores in the box with a snug lid, pulls off and you're ready to begin your game.
This began with the tray from https://www.thingiverse.com/thing:2486312
The lid (also posted here) was redesigned as a snap fit lid instead.
Printed with 0.28mm layer height, full honeycomb infill, no top or bottom layers. Choose your infill percentage for density of honeycomb pattern. Or print with top and bottom layers as typical (almost double the print time). This prints out fast and strong and good looking.
Check my other remix for Player Token Cases : https://www.thingiverse.com/thing:3213321
Post-Printing
The lid is not an easy part to fit. It will either fit very tightly or not at all. My print settings were tailored for a very snug fit and with sanding of the seam I am able to slide it on tightly. Trial and error with multiple prints might be required for you. Otherwise a low tolerance part will not be friction fit and you will need a rubber band and or some other design to keep lid on, which defeats the purpose for my needs... good luck
If you succeed, the lid serves as an extra shallow tray to keep bits contained while playing, which I find useful grabbing the small cubes often throughout a game.
If my design works for you, please consider buying me a coffee (preferably a beer!)
https://ko-fi.com/schleprocker
Category: Toy & Game Accessories