Terraforming Mars Player Token Hex Bowls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple scaling down in z only to hold the Terraforming Mars Player Cubes. Printed with no top or bottom layer for…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 785
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple scaling down in z only to hold the Terraforming Mars Player Cubes.
Printed with no top or bottom layer for looks, speed, and hexiness using full honeycomb in your slicer infill settings.
0.28 layer height
The lid is well designed by mathgrrl such that it will squeeze into place and snap in naturally. I didn't have to fiddle with tolerances at all to have a tight fit lid that is still removable.
UPDATE: 12/18/22
The resource boxes press fit lids are becoming a little loose for me, so I made a simple 'money clip' to make sure it doesn't come loose in the box. May not be for you, but if you use it, you should have the honeycomb infill for top/bottom surfaces as my photos have. The clip has a little nob to fit into the honeycomb, ensuring it stays fixed in place.
If my design works for you, please consider buying me a coffee (preferably a beer!)
https://ko-fi.com/schleprocker
Category: Toy & Game Accessories