1 / 3
PLAYMOBIL Steck Castle Torch + Flame 3007692 / 3007693 - 3666 Replacement Parts — zdjęcie 1
1 / 3

PLAYMOBIL Steck Castle Torch + Flame 3007692 / 3007693 - 3666 Replacement Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PLAYMOBIL Steck Castle Torch + Flame – 3007692 / 3007693

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a 3D-printable replacement for PLAYMOBIL part 3007692 / 30076920, the classic torch handle, together with part 3007693 / 30076930, the small flame that attaches to the top.

These parts were used in classic PLAYMOBIL medieval and castle sets such as PLAYMOBIL 3666, as well as many other vintage Knights and castle sets.

The torch consists of two separate pieces:

  • 3007692 / 30076920 – Torch Handle

  • 3007693 / 30076930 – Small Flame

The handle has the original-style tapered body and upper mounting post, while the flame has a socket underneath that fits onto the top of the handle.

I tried to reproduce the overall shape and connection between the two pieces as closely as practical while keeping them suitable for FDM printing.

The flame is considerably more detailed than the handle, so I strongly recommend printing it with a 0.2 mm nozzle using the supplied 3MF. The organic flame shape benefits significantly from the very small layer height and fine slicing resolution already configured in the project.

The handle is much simpler and easier to print, although the supplied 3MF is also prepared for a 0.2 mm nozzle to give the small connection surfaces good dimensional accuracy.

RECOMMENDED COLORS

For an original-style appearance:

  • Print the torch handle in light brown or brown

  • Print the flame in orange

Other colors can of course be used to match custom castle builds or different PLAYMOBIL sets.

INCLUDED FILES

3007692.stl

Individual torch-handle model for custom slicing.

3007692.3mf

Prepared high-quality print project for the torch handle.

The supplied plate already contains four torch handles, making it convenient when restoring a castle that is missing several torches.

3007693.3mf

Prepared high-detail project for the small flame.

This file contains the flame at the correct scale and orientation together with the tuned 0.2 mm nozzle profile and support configuration.

For the flame in particular, I recommend using the supplied 3MF rather than creating a new project from scratch.

Print all parts at 100% scale.

ASSEMBLY

After printing:

  1. Remove the brim and support material completely.

  2. Clean any strings or small blobs from the top of the torch handle.

  3. Carefully clean the opening underneath the flame.

  4. Push the flame onto the cylindrical post at the top of the torch.

  5. The flame should sit securely while still looking like the original two-piece PLAYMOBIL torch.

3D printing settings

3D PRINTING SETTINGS

Two different prepared 3MF projects are supplied because the simple torch handle and the detailed flame benefit from different printing strategies.

For the best results, use the provided profiles rather than applying the same settings to both parts.

3007692 – TORCH HANDLE

Use:

3007692.3mf

The project is prepared for:

  • Printer: Bambu Lab A1

  • Nozzle: 0.2 mm

  • Layer height: 0.10 mm High Quality

  • Initial layer height: 0.10 mm

  • Wall generator: Classic

  • Walls/perimeters: 6

  • Infill: 100%

  • Infill pattern: Zig-zag

  • Supports: Disabled

  • Scale: 100%

The handle is a small functional part, so the prepared profile uses six walls and 100% infill rather than trying to save a very small amount of filament.

This also gives the narrow upper post more material and makes the finished part more resistant to breaking during installation and normal use.

HANDLE BUILD-PLATE ADHESION

The prepared project uses:

  • Brim type: Outer brim

  • Brim width: 5 mm

  • Brim/object gap: 0.10 mm

The 3MF contains four handles already arranged on the build plate.

If you only require one, simply delete the additional copies before slicing.

HANDLE MATERIAL

The supplied project is configured for PLA.

The saved filament options include:

  • PolyTerra PLA

  • Bambu PLA Basic

The saved starting temperatures are approximately:

  • Nozzle: 220°C

  • Textured PEI bed: 65°C

Adjust these values if required for your specific PLA.

HANDLE SPEED SETTINGS

The prepared profile uses approximately:

  • Outer wall: 60 mm/s

  • Inner wall: 150 mm/s

  • Solid/infill: 100 mm/s

  • Initial layer: 16 mm/s

  • Outer-wall acceleration: 2,000 mm/s²

  • General acceleration: 4,000 mm/s²

The slower first layer is useful because the footprint of each torch is quite small.


3007693 – SMALL FLAME

Use:

3007693.3mf

I strongly recommend keeping the supplied high-detail profile for this part.

The flame has an irregular organic surface with much finer geometry than the handle, so it benefits considerably from the 0.2 mm nozzle and 0.04 mm layer height.

The prepared project uses:

  • Printer: Bambu Lab A1

  • Nozzle: 0.2 mm

  • Layer height: 0.04 mm Ultra Detail

  • Initial layer height: 0.10 mm

  • Wall generator: Arachne

  • Walls/perimeters: 4

  • Infill: 12%

  • Infill pattern: Gyroid

  • Top layers: 10

  • Bottom layers: 8

  • Slicer resolution: 0.005 mm

  • Scale: 100%

Arachne and the fine slicer resolution help preserve the small irregular shapes that form the flame.

FLAME SUPPORTS

Supports are required for the flame and are already configured in the supplied project.

Settings include:

  • Supports: Enabled

  • Support type: Tree / Automatic

  • Support threshold: 30°

  • Top Z distance: 0.06 mm

  • Bottom Z distance: 0.06 mm

  • Support/object XY distance: 0.35 mm

  • Support-interface spacing: 0.50 mm

  • Top interface layers: 2

  • Support base-pattern spacing: 2.5 mm

Do not disable the supports unless you are deliberately developing a different printing orientation.

The very small 0.06 mm support separation is intentional for the 0.04 mm high-detail profile.

FLAME BUILD-PLATE ADHESION

The flame project uses:

  • Brim type: Outer brim

  • Brim width: 5 mm

  • Brim/object gap: 0.10 mm

Because the part is small and relatively tall compared with its contact area, keeping the brim enabled is recommended.

FLAME MATERIAL

The supplied profile is configured for PLA.

Saved filament options include:

  • Bambu PLA Matte

  • Bambu PLA Basic

The saved starting temperatures are approximately:

  • Nozzle: 220°C

  • Textured PEI bed: 65°C

Orange PLA gives an appearance closest to the classic original flame.

FLAME SPEED SETTINGS

The high-detail flame profile deliberately prints the visible surfaces slowly:

  • Outer wall: 35 mm/s

  • Inner wall: 55 mm/s

  • Infill: 70 mm/s

  • Initial layer: 16 mm/s

  • Outer-wall acceleration: 1,200 mm/s²

  • General acceleration: 2,500 mm/s²

These settings prioritize small-feature quality over print speed.

SUPPORT REMOVAL

Allow the flame to cool before removing the support material.

Remove the larger tree-support sections first and work toward the small lower mounting socket gradually.

Avoid twisting the flame aggressively while removing supports, as the connection area underneath is the part that needs to remain dimensionally accurate.

Tweezers or small flush cutters can help remove the final pieces of support material around the socket.

WHICH PROFILE SHOULD I USE?

For the torch handle:

0.2 mm nozzle + 0.10 mm High Quality

For the flame:

0.2 mm nozzle + 0.04 mm Ultra Detail

The handle is simple enough that it can also be resliced for a 0.4 mm nozzle if necessary.

For the flame, however, the supplied 0.2 mm / 0.04 mm profile is strongly recommended because the smaller nozzle preserves the irregular flame shape much better.