Dna167/133/75
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is my dna133/75 3d printed mod . it will fit 2x 18650 batteries one dna200/75 board . id suggest to print in abs…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 624
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
this is my dna133/75 3d printed mod . it will fit 2x 18650 batteries one dna200/75 board .
id suggest to print in abs or petg. you may, or may not need supports for the board standoffs.
id recommend printing 200 microns or less. typical time on print is 3 hours with lid and buttons,
i designed the box with ease of install in mind.
id ask, if anyone makes this, please post it. id like to see :)
UPDATED TO V3!!!! added battery brackets and thickened up the battery tray to make it stronger. added a tiny bit of thickness overall aswell
updated again!!!!!to v4 fixed placement of battery brace and made screen cut out bigger.
parts
battery clips :keystone 228 and 209
dna 200/75 evovlapor.com
22mm 510 varitube
Print Settings
Printer Brand:
MakerGear
Printer:
M2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200 micron or less
Infill:
the higher, the better
Category: 3D Printing