4040 ThinkPad keyboard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for Lenovo ThinkPad TrackPoint Keyboard II for 4040/4080 aluminium extrusion.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires 3x M5 nuts and 3x M5x20 (or 25) bolts with extension, one less of each without it. Mounting with M5 T-nuts and M5x15.
I printed with Core One+ using Prusament PETG with 15% gyroid infill. Mount was printed with 5 perimeters, 5 top and bottom layers, rest with default settings. Tolerances are tight. Photo is with two extensions so my stick can move freely. There might be some small misalignments in the joints, but they are fine enough for my usage, so I'll let it be. If it starts to annoy me too much, I'll correct and upload a fixed version.
Used a anti-slip silencer pad to keep the keyboard from sliding around.
I printed https://www.printables.com/model/1471336-t-slot-4040-nut-insert-set-m3m4m5 for T-nuts, 4x M5.
Update 28.8.2026: Was wobbling a bit too much, so printed a 2nd arm, made a new version of the joint for that, to be able to rotate more freely.