1 / 3
Compact PLA and PETG Temp Tower for Prusa Core One — zdjęcie 1
1 / 3

Compact PLA and PETG Temp Tower for Prusa Core One

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Temp tower for tuning filament temperatures. This is built specifically for the Core One.

Ocena
0 / 5
Polubienia
3
Pobrania
63
Wydruki
0
Wyświetlenia
199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Share Alike

Temp tower for tuning filament temperatures.

This is built specifically for the Core One. Please only run these files on a Prusa Core One with 0.4mm nozzle.

Built with default BALANCED settings (except for line infill instead of grid) and GENERIC PETG from Prusaslicer 2.9.6 and configurations from 20 Aug 2026 (profile version 2.5.7). Then added nozzle temp changes in the gcode.

Overhangs are at (bottom to top) 60°, 45°, 30°, and 25°.

Tagi