1 / 4
31.8 mm seat tube Airtag holder Loshall Tag — zdjęcie 1
1 / 4

31.8 mm seat tube Airtag holder Loshall Tag

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

waterproof 31.8mm seattube Airtag/Loshall tag holder

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a little container used to safely put an Airtag or Loshall tag in your bikes Seat tube.

its made for 31.8mm seat tubes.

theres a m10 thread in the container, so you can pull it out with a m10 Threaded rod. It should fit snug in the seat tube, so it doesnt fall out if a thief removes the seat and turns the bike upside down. if it doesnt fit, carefully sand the outer diameter down until it fits.

it uses 2x 29mm OD 3.5mm girth o-rings to protect the tracker from moisture.

the Lid part has a little pocket, its there to be filled with a little silica gel.

Dont put it into the bike with the threads facing downwards, you'll not be able to remove it.

Tagi