Black Hole Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The second version of this design is out now! Link is in the description.
- Ocena
- 5 / 5
- Polubienia
- 1952
- Pobrania
- 3607
- Wydruki
- 9
- Wyświetlenia
- 43 798
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: Version 2 is out now! Go check it out here.
This is a light up display lamp that looks like a black hole. It requires only two colors of filament and an LED Lamp Kit 001. Use the adhesive pad that comes with the kit to secure the light in the lamp so it doesn’t accidentally fall out of place. This model does also print in multiple parts that will need to be glued together (I recommend using super glue or 3D Gloop). Make sure the parts are properly aligned, the light is securely in place with the adhesive pad, and the cord is fed out of the back of the lamp before attempting to glue everything together. Precise gluing is required. Use the print settings specified for each part.
Print Settings
"LightFront" and "LightBack":
white or clear filament
100% infill
enable brim with a very low brim-object gap and consider applying adhesive onto the build plate to prevent warping
optional: enable supports
"BlackParts":
black filament
100% infill
enable supports
"Stand":
5-15% infill
3 wall loops