Tippmann Pro/Carbine Front Bolt (CA-17)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I dropped the bolt for my tippmann somewhere on the floor, and this will do for now.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 1
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I dropped my original bolt on the floor somewhere and haven't found it yet. I lengthened it a little and added a spherical cut-out for the forward portion to cup the paint to increase surface area and try to be a little more gentle. I also added channels from the center to the spherical cutout area that should hopefully spread out the impact of the air from the powertube to also hopefully crack less paint and rounded off the outer edge to hopefully also be gentler on the next round up the loader tube.
This one has a slot for the o-ring - should be the same as the original.