One-Handed Queen Bee Marking Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A one-handed clip to capture a queen bee for marking her for easy visibility.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A marking clip for queen bees featuring integrated slots for marking pens and a worker bee escape gap in the front, ensuring the queen remains safely secured during marking.
Files Included:
Main File: Pre-configured with custom brims for optimal bed adhesion.
Standard File: Clean model without custom brims for users who prefer adding their own supports or brims in their slicer.
Print Settings:
Material: PETG or other strong, flexible filament (avoid brittle materials like standard PLA for long-term clip tension).
Layer Height: 0.1mm recommended.
Temperature: Print on the higher end of your filament’s temperature range for maximum layer adhesion.
Materials Need:
2x M3x6mm Socket Head Cap Screws (SHCS)
Assembly Instructions:
Remove all custom brims from the 3 printed parts.
Orient the two clamp halves together with the two square corners on the outside (the clip will not close properly otherwise).
Slide the spring between the clip halves and line up the mounting holes.
Insert an M3x6mm SHCS into each side and tighten until snug (be careful not to overtighten and strip the plastic).
Make sure to post a Make to earn some free Prusameters!
Happy beekeeping and happy printing!