Modular Inspiration Token/Sparkly Cookie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little token with some sparkles, I use them for D&D inspiration or any other sparkle cookie needs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a silly little token that can really be used for anything, I'm using them to give to players in a D&D campaign that catch various references I make throughout the campaign, Obiously you can use them for antything. The quarter and half models are so that they can be collected like little treasures, and can be mixed and matched! Would recommend using different colors though, I might make a 3mf with separate parts if I get a chance.
I might also make a variant with a concealed connection system at some point too.
I made mine without a MMU, by just by pausing after the 3mm thick base layer and manually swapping the filament, if you can split the model that's probably the best option for a MMU printer.
Dimensions
Diameter: 40mm, 36mm for the raised ring on the base,
Thickness: 2mm at the lower part of the base
3mm for the raised part of the base,
4mm for the smaller sparkles
5mm for the big sparkle