Meshing Gears Finger Fidget- (2x Video included) modular!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Interlocking finger gears that mesh together — a satisfying connected-motion fidget toy. No supports needed!
- Ocena
- 5 / 5
- Polubienia
- 125
- Pobrania
- 372
- Wydruki
- 4
- Wyświetlenia
- 1821
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — NoDerivatives
Geared Finger Fidget – The Gears Are Connected!
A satisfying 3D-printed fidget toy that connects all four fingers through a set of interlocking helical gears. Slide your fingers into the four rings and move them — thanks to the chevron/herringbone gear teeth, each finger's motion is transferred to its neighbors, creating a smooth, mechanical, oddly relaxing connected movement.
Features:
4 herringbone-cut gears that mesh together for real connected motion
Snap-fit gear rings (red) that click into the white finger holders
Smooth rotation once assembled — great desk toy / stress reliever
Two-color design (works great with a color change or dual-extrusion setup)
No supports needed for most parts; small, fast prints
You can make the chain as long as you want 2,3,4,5,6,7,8,...
Print Settings:
Material: PLA / PETG
Layer height: 0.2 mm
Infill: 15–20%
Supports: Not required (test overhangs on your printer)
Recommended: Print gears in a contrasting color from the holder for the best visual effect