Stud Earring Insert for Stackers Jewellery Box Classic Trinket Layer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small tray insert for the Stackers jewellery box Classic Trinket layer, for holding stud earrings. Each tray…
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 111
- Wydruki
- 2
- Wyświetlenia
- 1658
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small tray insert for the Stackers jewellery box Classic Trinket layer, for holding stud earrings. Each tray fits exactly into one of the compartments and can hold 4 large pairs of stud earrings or more if the earrings are smaller.
Print in the orientation the STL comes in, to avoid needing supports.
Depending on the quality of the first layer, some of the holes might not be perfect. You should be able to punch through by pushing an earring in, and after that it should work just fine.
If you happen to have the Grey and Mint jewellery box, I found that this PLA matches the colour pretty well.
Print Settings
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
3D Jake PLA
Pastel Green
Category: Organization