Carrera Go & 143 guard rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a quick remake of mb04fns's original design. I flattened one of the long ends with 0.5mm so that it slightly…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a quick remake of mb04fns's original design. I flattened one of the long ends with 0.5mm so that it slightly better fits the white rail fixtures.
Works with Carrera Go & Carrera 143 (digital) tracks.
You will need 2 of these rails for a 90 degree curve and, believe it or not, you will need 4 for a 180 degree curve.
Simply print with ABS in .35 resolution with 100% infill.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.35
Infill:
100%
Notes:
Simply print with ABS in .35 resultion with 100% infill.
Category: R/C Vehicles