1 / 5
2 Glencairn whiskey glasses in a travel case — zdjęcie 1
1 / 5

2 Glencairn whiskey glasses in a travel case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

** Update Dec 13 2020I have replaced the STL file of the lid as the old one had the hinges oriented backwards. The STL…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

\* Update Dec 13 2020 I have replaced the STL file of the lid as the old one had the hinges oriented backwards. The STL file (glazenkoffertje_2_tv_2.stl) with the combined components was, and is ok. Thanks electrokill for the hint.*

Here is a set of two Glencairn whiskey glasses in a travel case with lid. The lid has functional hinges that need a short piece of paperclip wire for a pin.

The case can be printed in your material of choice; PLA is the easiest option. The glasses can be printed in clear PETG.

If you want the glasses to be whiskey-tight, make sure you set the wall thickness to at least 3 layers. For more reading on creating water tight prints: https://www.instructables.com/id/3D-Printing-Make-Water-Tight-and-Air-Tight-Contain/

Attached are 4 STL. One overview with all the objects and 3 STL files holding each component separately. The STL are now in miniature; The case is about 7.3 cm tall (2.9 inch). The glasses are about 6 cm tall ( 2.4 inch). But they are easily scalable prior to printing of course.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2.5

Rafts:

No

Supports:

No

Resolution:

.35

Infill:

20%

Filament: Generic PLA and PETG Clear and Grey

Notes:

Attached are 4 STL. One overview with all the objects and 3 STL files holding each component separately.
The STL are now in miniature; The case is about 7.3 cm tall (2.9 inch). The glasses are about 6 cm tall ( 2.4 inch). But they are easily scalable prior to printing of course.

Post-Printing

The holes in the hinges might need to be drilled or pierced after printing. I used a small 1.2mm drill

Category: Food & Drink

Tagi