Arca Swiss tripod plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic Arca Swiss tripod plate for direct use or incorporating in other models to make them tripod mountable.
- Ocena
- 4,8 / 5
- Polubienia
- 89
- Pobrania
- 1142
- Wydruki
- 5
- Wyświetlenia
- 3654
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Arca swiss tripod plate. includes source, also for combining with included gopro mount.
The main file has a slot for inserting a ¼-20 screw. I like the ones with a d-ring handle that have a shaft around 10mm long. Adafruit sells one (https://www.adafruit.com/product/2629)
But you can probably find them on ebay, aliexpress, amazon (https://amzn.to/3vsourv), etc.
Also included is a gopro mount (the bottom part).
gopro-swiss has the gopro mount merged with the arca plate.
There's also a gopro mount that is designed for heated insert nuts, but you'll probably have to modify the source to fit the inserts you have. get the shortest M5 inserts you can find. (or cut them down.
If you print the slotted plate upside down, it needs no supports.
a small amount of support (on the cylindrical bushing side) is needed as well as to support the slots on the right side up plate.