Mesh node solar buoy cap removal tools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of tools to clamp the body and turn the cap off a tightly sealed plastic solar powered light buoy
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Like others I wanted to try turning one of these cheap solar light buoys into a small solar mesh node, but mine turned up with a glued cap like many others.
I made these tools to better be able to clamp the body of the buoy and get good leverage on the cap using a 30mm socket and breaker bar.
I printed it in PETG in the orientation in the file using PLA as a support material. It actually didn't take a ton of force to remove the cap and mine way completely undamaged, but I'd probably recommend 4 walls just in case. It fits the cap very snugly, so I'd recommend making sure your tolerances are good.