Nautilus Tray (Flat Bottom Remaster – Print-Ready)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Credit for this stunning Nautilus plate to Lin on Makers world
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
I take no Credit for this stunning Nautilus om custom plinths to heavy support structures, I realized the bottom surface of the original mesh was uncoordinated and uneven, making it virtually unprintable off the build plate.
To help share Lin’s work and make it accessible to everyone, I brought the original model into Fusion 360 and reworked the geometry to add a clean, flat bottom. I’m not taking any credit for the original design—I just wanted to fix the base mesh so everyone can actually enjoy this piece without going through the same trial-and-error process I went through!
Print Settings Used:
Material: PLA
Nozzle Temp: 215°C
Bed Temp: 60°C
Layer Height: 0.20mm (Standard recommendation, but adjust to your preference)
Infill: 20% (Feel free to tweak based on your setup)
Supports: I added a few tiny, minimal supports near the base overhangs just as a safety precaution. They pop off effortlessly without damaging the print.
Sharing the Love of 3D Printing:
I’m a strong believer in keeping 3D printing open, accessible, and free for everyone to enjoy. I encourage fellow makers to keep sharing their designs freely with the community so we can all keep creating together.
Be sure to check out Lin’s other work on MakerWorld to support the original creator, and feel free to browse my page for more free models and fixes! Happy printing!