Hollow LED Clock (remix of Shiura Hollow Clock 5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix merges the SHiura Hollow-clock 5 with a led ring, leading to this "Hollow-LED clock"
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FOREWORD
This remix merges the SHiura Hollow-clock 5 with a led ring, leading to this "Hollow-LED clock"
Before all, note that the mounting is a bit more tricky than the original design (and requires a bit of electronic knowledge)
The software itself needs a little tuning
So this is not a "plug-and-play" project
BUILDING THE CLOCK
Parts modified for this purpose are the rotor box and the base. It adds a new part "LED ring".*
All the other parts come from the original design
Naming:
+ parts named HCL correspond to the new design
+ HC5 correspond to the original clock
+ _OPT are optional parts
+ _SUP indicates parts which needs (tree) supporting
The Annex.zip archive contains guidance for building the clock (pictures and cabmling diagrams)
The LED-ring part is printed in two colors with a filament change either at layer 4, or at layer 6 (before the start of the layer), based on a layer height of 0.2 mm
Changing at layer 4 let the divisions appear by transparency, but this is no longer the case with a change at layer 6 (see difference in picture 15)
For the first 6 layers, I'm using Esun cold-white PLA (with a thickness of 0.6mm), that is sufficiently translucent
Note that the same two colors process may eventually be used for the clock hands
The clock is made mainly for an ESP32-C3-mini or plus chipset, or eventually an ESP32-S3-zero (but I had lot of trouble with the WiFi and heating on this one)
Since the mounting of the ESP on the stepper driver boards differs, distinct bases are provided for the C3, the C6 and the S3
The rear of the base is modified to (optionally) integrate a mini RTC board. The one with -ant suffix has an extra hole in case an external antenna is used (ESP32-C3-plus)
Cabling for the C3 mini and plus, as well as the S3 and the XIAO C6 is illustrated in the HLC-<chipset>-cnx.jpg file
The led strip is made from 4 segments to be weld together, resulting in a circle of about 157mm diameter (did not found a complete led circle with this diameter)
In order to obtain an exact circle, it is possible to print the c157.pdf model (check that you printer does not scale it), and fix the segments on it using tape (see picture 00)
I have made the 3 connections between each segment pairs using resistors "legs". Only 3 segments pairs are welded. The last one - DOUT side - is left open, and the connectors on the ending side insulated to avoid short circuit with the "entry" segment (see picture 01)
The connectors of the entry side (DIN) are weld with cables toward the ESP. These cables are routed inside the base through the rotor box feet before being weld to the ESP (see pictures 02 to 05)
The LED ring is clipped to the rotor case by pressing firmly on the LED ring part
Connecting ESP and stepper driver is made using the same method as the original model. But there is extra cabling for the LED strip, and possibly for the RTC board if you plan to use it
Power for the LED/RTC is mainly taken from the stepper board (see pictures 06 and 07), except the RTC that takes its 3.3V from the ESP
Cables are kept as short as possible to fit (more or less) easily in the base (stepper motor cables may also be shortened; see picture 09)
Note that the RTC module is not really useful when clock is connected to Internet (just speed up the init process)
But it is of great use when the clock operates in standalone mode (without internet access), because clock starts ticking immediately instead of waiting the time synchronization by the user through the Web pages
Care shall be taken when closing the box to avoid interferences between the cables and the gear
LED ring and RTC has been bought on Ali, searching for:
- "LED ring 60 led" (beware: 158mm ring is made of 4 parts - only 172mm rings come in one part, but unsuitable for this project ; select 5V power, not 12V)
- "rtc ds3231" (the black connector and the pin shall be removed in order to weld the cables on the board; see picture 08)
GENERATING THE SOFTWARE
The HLC software (in the HLC.zip archive) is quite complex (applies to several LED / motor clocks, and adds a lot of functions)
Instructions for configuring and generating the software are given at the end of HLC-clock-howto.pdf
This document also describes the use of the Web interface
