1 / 1
BB92 bearing remover for 30 and 24mm spindle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom bracket tool for BB92 with 30mm and 24mm spindle
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created but didn't use it. Because in the end, the bottom bracket bearings were fine. I test fitted it and looks fine. It was made for 30 mm spindle, but it could work on 24mm, or smaller also...
I would recommend to use at least PETG for printing with enough infill.