Metric screws measuring tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an slight upgrade of previous remix, adding at the beck side treated holes for screws and labels. I used a…
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 382
- Wydruki
- 7
- Wyświetlenia
- 2030
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an slight upgrade of previous remix, adding at the beck side treated holes for screws and labels.
I used a filament changes one layer too early, so the final print was in three colours, but using 0.2 resolution change finalement at layer 51 and only numbers will be in different colour.
Actually, I like this three colours combination ;)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Ender PLA dual
Notes:
change colour at layer 51 (using 0.2 resolution)
I also use infill 2 lines to make a print faster and strong as 20% or more (with only 10% infill)
Post-Printing
cleaning the holes
treated holes are so small from M3 that a little cleaning (treating) the smaller holes may be required
Category: Tools