Nederlandse Spoorwegen MW 92316 - Marmerwagen - Spoor 1/Spur 1/1:32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nederlandse Spoorwegen MW 92316 - Marmerwagen - Spoor 1/Spur 1/1:32
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 208
- Wydruki
- 0
- Wyświetlenia
- 1107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nederlandse Spoorwegen (Dutch state railways), operated several of these 3 axle open wagons for heavy loads. They were build for its predecessor, Staats Spoorwegen.
Because of the capabuility to carry heavy loads (30 tons) there were called "marmerwagen" (marble wagon). The abbreviation was MW.
Because of their size and load capacity they were also used to transport damaged small steam locomotives to the main workshops.
They were in service untill the end of the 60's
Good luck printing this small wagon!
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Supports:
Yes
Resolution:
0.15 mm
Infill:
20%
Filament:
Basf PET
Black Post-Printing =============
Standard LGB, Märklin or Hübner wheel sets run in 6.0 x 2.5 x 3.0 mm ball bearings.
To be able to negotiate tight curves all axles are interconnected. The middle axle slides sideways when the outer axles rotate.
All items screw together with M2 and M3 screws.