Nederlandse Spoorwegen - Seinpost Leidseveer / Utrecht Centraal - Signal Post - Gauge 1 (1:32)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nederlandse Spoorwegen - Seinpost Leidseveer / Utrecht Centraal - Signal Post - Gauge 1 (1:32)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just before Word War II the Dutch Railways build a very modern concrete signal post at the west entrance of Utrecht Central Station (Leidseveer).
This remarkable concrete structure, designed by achitect van Ravensteyn, was never comissioned. Due to the war, the German build signal equipment was never delivered.
The building was never used for railway operations. It was eventually used as a temporary house for railway staff.
It is very unfortunate the iconic (monumental) qualities of this clean and modern design were overlooked back in 1958. It was demolished because additional tracks were required......
Resources:
- https://forum.beneluxspoor.net/index.php?topic=36629.0
- https://www.facebook.com/seinhuis/
- https://www.duic.nl/cultuur/verdwenen-gebouwen-sculpturale-seinhuis-leidseveertunnel/
This is my interpretation of van Ravensteyn's signal box in Gauge 1 (1:32)
Print the walls flat on the print bed. Several 2 mm alignment holes help to allign when assembling/glueing all parts together.
The stairs are mounted to the first floor with M2 screws. Handrails are made of 1.5 mm brass wire.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.25 mm
Infill:
20%
Filament: REAL Filament PETG Grey