DIN Rail Mount for BrownieBoards Ideal Diode Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Provides a way to mount the 3-Channel, 20Amp Ideal Diode Board with Priority Input module by BrownieBoards to a DIN Rail
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This print is specific for the 3-Channel, 20Amp Ideal Diode Board with Priority Input by BrownieBoards, and will mount it perpendicular to a DIN Rail.
There are qty 4 holes sized for M2 heatset inserts, though you could also just use nuts on the backside.
Ideal Diode Module: https://store.brownieboards.com/product/3-channel-20amp-ideal-diode-board-with-priority-input/
Heatset inserts (tested with these, other brands should still work): https://www.amazon.com/dp/B0FWCG2K1F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1)
The board is centered on the 3D print, with inputs and outputs facing up and down. Since the module's hole pattern is not symmetric, mirror the print if you'd like the inputs and outputs to be swapped.
Print with a high-temp filament (like PA6-CF) if you expect to push the module to its limits. Otherwise any filament should do - though I prefer ASA.