1 / 12
Coraline — zdjęcie 1
1 / 12

Coraline

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is Coraline with the cat and a base that is swirling into the other world. The spider leg from the other

Ocena
0 / 5
Polubienia
14
Pobrania
95
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Public Domain

This is a model of Coraline. She is standing with her cat on a 3-D model base that has wood planks swirling into the other world and you have the other mother spider leg reaching out to touch her or grab her pull her in. 

I printed Coraline at .08 layer height three walls

I printed the base at .16layer height three walls and it took 957 g of filament

Coraline is 1/6 size the base should fit on a print bed that is 300 x 300 as far as your supports they should fit, but you're gonna have to make your support first expansion layer very small for example, my first layer expansion for my supports is 0.5

This has 6% infill in order for me to get under a full roll of filament.

Tagi