Sinusoidal Planetary Gear Kit Reel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first attempt at a kite reel using a planetary gear set with a sinusoidal profile instead the boring way.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Planetary gear kite real. Gears are print in place, I used PETG, but I have printed these in PLA just fine. It is my first attempt at a kite reel and I discovered that while you get great reduction and ease of pulling in the kite, it takes a while to reel it in. It does not need to have any sort of stop that I have found due to the reduction.
Kite is assembled with M3 thread forming screws and a single eye bolt. I used an eye bolt for wood purchased at the big box store.
the print in place gears should just snap on to the main handle.
I will add more detail in the coming days.