Convoy 3X21D F150R Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom rotating two piece gasket.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The centre of the gasket remains fixed in place while the outer piece rotates with the reflector. I enjoy this design because sometimes the reflector hole diameter changes with different batches, so even if the outer gasket fits tightly into the reflector, there's zero risk of ripping the emitter off the mcpcb.
This model is designed for use with ASA filament, it's 0.3mm larger to account for shrinkage. Only print in light colours to avoid the led light being absorbed and heating up. Black will start smoking within seconds.
Supports maybe needed for the outer piece.
1.6mm - 2mm height. Default is currently 2mm.