Rubble and Rocks - 16 scatter pieces, no two alike, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sixteen scatter rocks, 8 to 38 mm. No two alike. No supports, no brim, all on one plate.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
Sixteen rocks to scatter across your table: six chunks of rubble from 8 to 14 mm, six rocks from 16 to 25 mm and four boulders from 29 to 38 mm.
No two are alike, and that is not a figure of speech. These are not four rocks rotated and rescaled: each one comes out of its own run of the same generator, with its own fracture faces and its own surface. Put them together on the table and you will not find the repeat, which is exactly what ruins a scatter set.
They are built to print, not just to render. All sixteen were checked layer by layer before publishing: a single footprint on the bed for every piece, from 38 to 754 mm2; the worst overhang in the whole set is 0.4 mm, where 1.6 is still healthy; zero bridges and zero islands in mid air. Which means no supports, no brim and no surprises halfway up.
The whole set fits on a 180 x 180 mm plate, the one an A1 mini has, using 95 mm of the 180 available. That is about 68 g of material at full solid, quite a bit less in practice.
The relief is sized for drybrushing: lumps that break the silhouette, medium grain and fine roughness, reaching 1 mm on the big pieces.
Shop: https://theobsidiandie.com
News by email: https://theobsidiandie.com/newsletter