Deutsche Bundesbahn Otmm61 / Otmm64 in Gauge 1 (1:32)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deutsche Bundesbahn Otmm61 / Otmm64 in Gauge 1 (1:32)
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 703
- Wydruki
- 2
- Wyświetlenia
- 2032
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my interpretation of the Deutsche Bundesbahn Otmm64/61 in Gauge 1 (1:32, 45 mm)
The Otmm61 looks identical to the Otmm64, but other metal-alloys and coatings are used.
Other European railways transported ballast and bulk-goods with very similar rolling stock.
Axles and wheel are constructed like my other designs using ZZ623 bearings.
The body is screwed to the frame with M3 bolts. The railing is made of ~1.5 mm metal wire. The buffers are attached to the frame with M4 threads.
The steps are hollow, allowing reinforcing with some 1 mm metal wire.
Good luck printing this typical wagon.
Rob