1 / 3
DB Rlmmp700 Schwerlastwagen in Gauge 1 - 1:32 — zdjęcie 1
1 / 3

DB Rlmmp700 Schwerlastwagen in Gauge 1 - 1:32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DB Rlmmp700 Schwerlastwagen in Gauge 1 - 1:32

Ocena
0 / 5
Polubienia
29
Pobrania
539
Wydruki
1
Wyświetlenia
1988
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my 1:32 (Gauge 1, 45 mm) interpretation of the DB Rlmmp700 flat wagon for heavy loads.

The construction is similar to most of my other designs. (i.e. axles/wheels, bearings, mounting bogies, buffers, etc.)

The top of the frame is flat to make printing easier. It is up you you to create and mount a real wood floor, or just print it.

 

27DEC2025: Corrected and uploaded revised 3D-files. (thanks to 3Deen and Jens for noticing severla errors)

Additional materials required:

  • 8 x F623ZZ bearing

  • 8 x countersunk M2 screw ~15 mm long

  • 4 x LGB or Märklin wheel sets on 3.0 mm axle. Axle length possibly shortened to fit between bogie side plates.

  • M2 screws ~15 mm long_and springs salvaged from ballpoint pens to create sprung buffers.

  • CA-glue for fixing the buffers to the buffer beams.

  • 1.0 mm metal wire to reinforce the steps and for creating the shunter grips under the buffers.

 

Decals are available from: https://www.modellbahndecals.de/Decals-Gueterwagen/Komplettbeschriftungen/Epoche-4-DB-104/Flachwagen-117/-Nass-Schiebebilder--Gueterwagen-Komplettbeschriftungssatz-Rlmmp-700--DB--Epoche-4--Artikel-Nummer--8146-.html and other suppliers.