1 / 3
Bleichert RK3 Bekohlungskran (HSB) in G-scale / 1:22.5 — zdjęcie 1
1 / 3

Bleichert RK3 Bekohlungskran (HSB) in G-scale / 1:22.5

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bleichert RK3 Bekohlungskran (HSB) in G-scale / 1:22.5

Ocena
5 / 5
Polubienia
35
Pobrania
501
Wydruki
1
Wyświetlenia
1942
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my interpretation of a typical DDR "Bleichert RK3" crane in G-scale (1:22.5).

The HSB in Wernigerode (D), and other museum railways still uses them to load coal on their steam engines.

There is hardly any open source information to be found about these "East German" cranes.

I have based my model mainly on pictures from my my private collection and found on the internet. If you can provide detailed drawings, I will improve my model.

Manual operation of the winches for boom angle and raising the load is achieved by turning two "thumbwheels". They are mounted on a M4 thread, with a spring (i.e. ballpoint pen) in between for friction.

Construction:

  • M2, M3 or M4 screw threads are provided for connecting items.

  • Hand rails: 1.75 mm filament or metal wire.

  • Operating levers. 1.75 mm filament.

  • Door hinges: ~1 mm metal wire

  • To correctly align the pulley on top of the boom, and the ladder to the main body, use some 1.75 mm filament.

(Positive) feedback to improve this model is welcome.

Best regards,

Rob

10SEP2026: On request implemented changes to the body and cabin. It is now an option to create this crane with a low or high cabin by glueing the cabin ('CABINE') on body 'KRAANOPBOUW LAAG' or 'KRAANOPBOUW'.

Tagi