HSB Rolbok "Vevey" Gauge IIm / 1:22.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HSB Rolbok "Vevey" Gauge IIm / 1:22.5
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my impression of the "Rollbock" type "Vevey" used by the Harzer Schmallspur Bahn (HSB) to transport standard gauge wagons on the 1 m narrow gauge HSB lines. (https://www.youtube.com/watch?v=6CBdZdcGpmI)
The "Rollbock" in Gauge IIm (1000 mm track, in scale 1:22.5 = 45 mm LGB-tracks), carrying Gauge II Standard Gauge (1435 mm track in scale 1:22.5 - 64 64 mm track).
Axles: 3.0 mm metal rod turning in F623ZZ-bearings fitted in the frame.
Wheels: 2 types, 3.0 mm hole or with M3 thread.
Link-pin: 2 mm metal wire.
Covers are fixed by M3/10 mm countersunk bolts.
To negotiate curves and uneven track succesfully the beam carrying the axle can rotate ~ 9' to both sides. The wheel flanges are now higher to minimize/avoid de-railing.
I've tested these "Rollbock's" om my layout. They perform OK through LGB R5 curves and switches. LGB R3 is propably the minimum radius.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
25%
Filament: Extrudr GreenTEC Black