Nederlandse Spoorwegen / RailPro FCCPPS Ballastwagen - Spoor 1/1:32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nederlandse Spoorwegen / RailPro FCCPPS Ballastwagen - Spoor 1/1:32
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 593
- Wydruki
- 0
- Wyświetlenia
- 2298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In 1986 the "Nederlandse Spoorwegen" (Dutch State Railways) started the refurbishment/reconstruction of "ballastwagons".
Details: https://nl.wikipedia.org/wiki/Fccpps and http://spoorhistorie.com/goederenwagens-fccpps.html
At first this rolling stock was only used in the Netherlands by Nederlandse Spoorwegen.
After privitasation in 1998 the ownership changed to "RailPro", later renamed to "Voestalpine Railpro". This company uses them for delivering ballast to several rail-construction-projects thoughout Europe. (https://youtu.be/6CBdZdcGpmI)
The 1980 prototype, initially known as type Eds-m - 954 8 000, later renamed to Fccpps - 643 7 000, is build with large openings in the supports for the hopper.
STL's for the hopper/body of both the prototype and the production version are uploaded.
This is my interpretation in gauge-1/1:32/45 mm of this typical Dutch wagon.
Just like in my other projects, 30 mm Marklin or LGB wheel-sets fitted with ball bearings (MR63ZZ) are fitted. 4 mm holes for mounting buffers are provided. Standard Marklin gauge 1 couplers can be fitted. Handrails and grab-rails are made from bend and soldered metal wire (1 and 1.5 mm) fitted in holes in the frame.
The body/hopper is screwed to the frame using 4 countersunk M3 bolts.
The handles and rods for operating the hopper are made of 1.75 mm filament glued in the provided holes..
Drawing status 15 June 2025: Uploaded improved files
Executed improvements:
- Separated steps from the frame. Steps are mounted to the frame using 1 mm metal wire
- Walls of the hopper are optimized and thicker.
- Sprung buffers. Use the spring from a ballpoint pen and an 12 mm long M2 bolt. Mounting details in provided section analysis. The buffer holder, with the sprung buffer is glued to the buffer beam with CA glue.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Resolution:
0.15 mm
Infill:
20%
Filament: REAL Filament PC/PETG Black