Nederlandse Spoorwegen Uikk 352 "kuilwagen" - Spoor 1/1:32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nederlandse Spoorwegen Uikk 352 "kuilwagen" - Spoor 1/1:32
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 327
- Wydruki
- 0
- Wyświetlenia
- 1474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In the 60's the Dutch Railways (Nederlandse Spoorwegen) ordered a small number of 2 axle wagons for large and/or heavy loads from Krupp in Essen (D). Several of these Uikk 352's are preserved. (http://www.nmld.nl/nl/object/1454 http://www.nmld.nl/nl/object/2321)
The drawing published by "Sleutel Spoor"(http://sleutelspoor.nl/projecten/intervervoer/) was very helpful to make this model.
The axles of standard LGB/Marklin wheel-sets are shortened a bit and turn nicely in F623ZZ-bearings. (eBay, AliExpress, Banggood, etc....) Fix them in place using a some CA-glue. I've applied this setup succesfully in my other models.
Standard Marklin hook-couplings fit in the opening behind the buffer-beam. It is also possible to mount realistic "hook and shackle" couplings.
Small holes for handrails below the buffers are available.
Suitable buffers can be found in my other designs. They mount in M4 threaded holes.
The model is just printed. Pictures of the finished "kuilwagen" are added.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: REAL Filament PC/PETG Black