Magnetic Clip-In Filter for Canon EOS 450D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printed magnetic clip-in filter is designed specifically for the Canon EOS 450D and allows you to use custom-cut
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magnetic Clip-In Filter for Canon EOS 450D
This 3D-printed magnetic clip-in filter is designed specifically for the Canon EOS 450D and allows you to use custom-cut filter material without modifying the camera itself.
The filter holder accepts a piece of filter material measuring approximately 31 × 26.5 mm. Simply cut your desired filter material to size and insert it into the holder. The holder uses 7 × round 3 × 1 mm magnets to securely hold the filter material in place.
The filter is designed to sit in front of the camera's mirror inside the camera body and is held magnetically in position. If necessary, the holder can additionally be secured with a small piece of adhesive tape to keep it firmly in place.
The filter is designed so that the edge of the filter material is not visible in the resulting images when correctly installed. You can check the example images to see the results and how the filter performs in practice.
Full-Spectrum Conversion
I used this holder as part of a full-spectrum conversion of a Canon EOS 450D. No permanent modification or disassembly of the camera is required for this setup. As an example, I used a 520 nm filter, but the holder can be used with different filter materials as long as they are cut to the required dimensions.
Why place the filter in front of the lens?
Using a filter in front of the lens instead of inside the camera body has several advantages:
The filter can be changed quickly without opening or modifying the camera.
You can use different filters for different applications.
The same camera can be used for different wavelengths or photography techniques.
The filter does not need to be permanently installed in the camera.
Different lenses can be used without requiring a separate internal filter for each lens.
The filter is easier to access, remove, and replace.
This makes the system particularly useful for experimental, infrared, ultraviolet, and full-spectrum photography, depending on the filter material used.
Important Disclaimer
Use this design at your own risk. I assume no responsibility or liability for any damage to your camera, mirror, sensor, lens, filter, or other equipment resulting from the use or installation of this filter holder.
Although no permanent modification or disassembly of the Canon EOS 450D is required.