Star Trek Voyager/DS9/Generations Combadge Replica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on a 3D scan of what is purported to be a 1:1 prop replica
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Star Trek Voyager/DS9/Generations Combadge. Based on a 3D scan of what is purported to be a 1:1 prop replica
I've included the 3D scan data. It's not the cleanest, but doesn't really need to be, the geometry is fairly simple. I took my best shot at making a solid out of it, but included the scan in case anyone else wants to take a crack at it.
Note: Magnet version is 1.2(ish, I forget exactly)mm thicker than the original as the 3mm magnet would not have worked otherwise. I have included both versions, should you want original dimensions.
STLs are in the print folder, they're split into 2 that will work for multicolor printing. There's also an all-in one version. There's a hole in the back for a 10mm x 3mm thick neodymium magnet off Amazon. Stick it to your fridge or wear it with pride!
Inventor 2026 part file is included.