Vtoman Jump 600X Battery Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to allow stacking of the Vtoman Jump 600X battery and extra expansion battery. Freecad model included.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
This stand allows the VTOMAN Jump 600X battery to be stacked with its extra expansion battery. Stacking is otherwise impossible due to the raised, rigid handles on the devices. The small pegs on the bottom of the stand rest in the bolt holes on either battery. The stand has a large hole in the middle so that the battery can be carried with the stand and a large flat area for the top device's rubber feet to rest on. The model is 250mm x 215mm x 55m and was printed flat with no supports on my Core One.
This is my first project with FreeCad. I have included the FreeCad model for ease of modification or remixing. I printed mine in PLA with a 15% infill and no support (the carbon fiber texture on the top surface is from my print bed.) If yours will see a lot of outdoor use you will probably want to use PETG.