Embroidery Floss Bobbin Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bobbin stand with slanted slots to hold 30 embroidery floss bobbins. Compatible with the Large Wooden DMC Chest.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created using openSCAD and printed in cherry-coloured wood-PLA with a Prusa MK3s.
Infill: 0%
Supports: None
Solid Layers: Top: 0
This print can be used for the Vintage Wooden Chest that holds ~500 embroidery flosses. You can print 5 bobbin stands per wooden chest drawer, it should fit exactly with the chest separators. One drawer can fit 150 embroidery floss skeins this way. Each stand holds 30 full embroidery bobbins. The bobbins I used have the dimensions 4 x 3.7 cm. The stand could also be used on it's own.
Each slot is slightly slanted so that the bobbins are easier to see in a row.
If there is tension when putting it in a drawer, the stand can be cut by 1-2mm at the front/back to make it fit.