Modular Staggered Hockey Puck Bin / Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular, scalable hockey puck bin! Stack off-center pucks for a staggered look. Fits 25% pen cups to 100% floor bins.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Modular Staggered Hockey Puck Bin / Organizer
Whether you need a desk-side pen cup or a full-scale floor container, this modular, stackable hockey puck bin is designed to scale effortlessly to fit your space and storage needs.
The textured puck sections interlock to build custom-height containers. To break up the rigid vertical cylinder look, each puck features an off-center design - allowing you to rotate and stack them in a natural, staggered swirl pattern that adds visual interest to any setup.
Base Options Included
Wide Ice Base: Extra-wide foot print styled like an ice rink surface for maximum stability on desks or shelves.
Closed-Off Puck Base: Flush, self-contained bottom puck for a clean, uniform profile.
Note: Both base styles are included in the same file set. Print your preferred style.
Key Features & Customization
Scalability: Print at 25% scale for a compact desk organizer, or scale up to 100% for larger floor bins (perfect for umbrellas, hockey sticks).
Modular Height: Add or remove puck modules at any time to instantly change the depth of your bin.
Off-Center Stagger: Rotate pucks during assembly to give your build a dynamic, textured offset rather than a plain straight wall.
Textured Grip Finish: Features realistic diamond knurling on the exterior walls for a solid aesthetic and tactile feel.
Text: It is possible to add your own text to the file. You need to adjust the spacing and location so the text is flush with the surface. Adjust the Embedded Distance, Thickness, and Text Gap. Picture included below:
Print Recommendations
Orientation: Print all pucks flat on the build plate.
Supports: None required.
Infill: 15% Gyroid
Walls: 3
Layer Height: 0.2mm (0.16mm for scaled-down versions like the 25% desktop build).
Material: Matte PLA would fit the natural matte look of a hockey puck. Also prints well with just regular PLA.
Gluing is recommended if you do not intend to take it apart.
Commercial License: Figuring out how it works but I intend to make one available for this. I will update the post when it is finished.