1 / 2
Deutsche Bundesbahn Gls205 / Gms54 Guterwagen - Gauge 1 (1:32) — zdjęcie 1
1 / 2

Deutsche Bundesbahn Gls205 / Gms54 Guterwagen - Gauge 1 (1:32)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deutsche Bundesbahn Gls205 / Gms54 Guterwagen - Gauge 1 (1:32)

Ocena
0 / 5
Polubienia
34
Pobrania
612
Wydruki
0
Wyświetlenia
1984
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsche Bundesbahn Guterwagen Gls205 / Gms54 in gauge 1 (1:32).

I "borrowed" the roof-shape from the "French Wagon" by dagnall53: https://www.thingiverse.com/thing:2675325

The coupling is a modified version of raby's design: https://www.thingiverse.com/thing:1605582

Everything else is designed from scratch.

I'm aware this design is not 100% accurate. I didn't count all the rivets and bolts. Some of the smaller, insignificant details, are excluded from the design, or simplified.

It was my intention to create a design that shows the essential features of these "Guterwagen".

Please contact me for further information.

Update 21SEP2018:

  • The first prints showed some errors. Corrections are applied.
  • Some changes are made to improve the print-quality and minimize print-time.

Update 30SEP2018

  • Modified wheels to allow more precise assembly.
  • Added an initial design for the brake system.
  • Added mounting points for mounting Marklin-style couplings to the floor section.
  • Designed Marklin style couplings.

Update 10OCT2018

  • Corrected some measurements.
  • Added brakes.

Update 11NOV2018

  • Minor updates executed.

Print Settings

Printer Brand:

Creality

Printer: 

CR-10

Rafts:

Yes

Supports: 

Yes

Resolution:

0.125 mm

Infill: 

25%

Filament: 12-3D Print PETG Black


 

Notes:

 

Use PETG filament to print these wagons. PLA is not stable enough, it is likely to warp on a hot summers day.
Print floor upside down.

Print the walls with the outside up, at 45' to the printbed, zig-zag pattern and apply "iron" in Cura. (2 end-walls, 2 side walls)

Print the roof standing on the bowed end. Select a brim to hold this ~30 cm high part firmly stuck to the bed.

.

Post-Printing

Print 4 buffers and glue to the floor using 4 mm pins.

Glue the body to the floor, slipping both doors in the slots.

Mount the wheels on 3 mm axles. Fit 3 x 10 x 4 mm flanged bearings F623ZZ to the ends, and slide the wheel-sets in the slots.

For now, mount Marklin couplings. 3D printed Marklin-style couplings will be designed in the near future.

Paint and apply decals.

Have fun! :-)

How I Designed This

Most of this modell is desinged in TinkerCad. It is just a small collection of basic shapes. ;-)

The roof and wheels are borrowed/adapted from https://www.thingiverse.com/thing:2675325 by "dagnall53".

 

Tagi