Another Proxxon MS4 vice holder for a Proxxon MF70 mill.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Proxxon MS4 vice holder for a Proxxon MF70 mill.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
When using the MS4 vice holder published by Easyrider112, I found it was hard to mount it.
The set-wheel of the vice is right on top of the mounting screw. You have to take the vice of the adapter to mount it and take it off the MF70.
The vice is oriented to close right to left.
I have made some additions to the initial design (https://www.thingiverse.com/thing:3081402)
Now the mounting holes are 6 mm to fit M6 mounting screws.
I've added 4 screw-holes to be able to close the vice front to back as well.
The original mounting hole is moved to make mounting easier, whatever the orientation of the vice.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: 12-3D Print PLA Black
Notes:
Printed with PLA, using 4 wall-lines for proper rigidity and stability.