CC1 gap filler for CC2 Top Hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a gap filler for the centauri carbon 1 that is using a centauri carbon 2 top hat.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a gap filler for the centauri carbon 1 that is using a centauri carbon 2 top hat. It fits pretty well I ended up using tape to hold the dovetail joints a little stronger on the thinner sections. for the cut models i removed the dovetails and just made them straight cuts, It could probably be cut differently maybe instead of dove tails use another type of connector in the slicer and then glue the parts together.
I used PETG but I think PLA would have been fine. 10% infill, Tree supports and arranged it for 2 build plates. took about 6 hours with PETG, was going to be about 3 hours with PLA.
*update: i added a version 4 model that has cups/storage in the larger section.