TPU: Anti-vibration feet (flex) for i3 MK3(s)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need to damp the printer because my neighbor..
- Ocena
- 4,933 / 5
- Polubienia
- 37
- Pobrania
- 383
- Wydruki
- 14
- Wyświetlenia
- 2397
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I need to damp the printer because my neighbor..
This is version 4 and it is good :)
It holds the printer tight and it still has a little movement.
I added the OpenSCAD file but there is nothing to tweak (well.. $fn and hidden are width and height but it's hidden because this is my best result)
Note: the stl/scad is not complete, but it needs some Slicer settings --> Print Instructions
Print instructions
I used Filament TPU 'medium' (Shore hardness A98) from extrudr.
You need to pay attention to the "vertical shells perimeter:
I printed all with 6 Perimeters but I found the 2 in the back flat after some days. So it needs more, so I printed two with 8 layers (the black ones) and it seems a bit too strong.. but I used it anyway (for the 2 feeds in the more heavy back).
The 3D objects are full bodies, to get the final object you need to set Slicer:
infill = 0%
Horicontal shells, both top and bottom = 0
vertical shells Perimeter = 6 (2x for the front), 7 or 8 (2x for the back)
The reason why I made as block is: it prints more elegant and cleaner and you can deside how thick the walls are.
I added a screeshot of my Slicer preview and the affiliate .3mf (the 6 Perimeter version)
ok, I also added my gcode but I wouldn't recomend to use that (e.g. I still have MK3 without 'S'm that has a different Z hight afaik). If you use Prusa Slicer, the easiest and savest way is to open the .3mf file and render it yourself.