Neck and Trap Arch — Head Support for Upper Trap Work
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An arch that supports the head while the upper traps release over the crest, so the neck is held rather than working
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
Neck and Trap Arch
An arch that supports the head while the upper traps release over the crest, so the neck is held rather than working.
TARGET AREA: neck, upper traps
SPECS
- Size: 195 x 181 x 80 mm
- Material: 1107.0 cm3
- Solid-core print: it does not compress, so the pressure you set is the pressure you get.
PRINT SETTINGS
- 0.2 mm layers, 3 walls, 20-25% gyroid infill
- No supports
- Any rigid filament
Original design. Every dimension comes from the anatomy of the target tissue and a contact-pressure model (p = F / A), not from what looked good in CAD.
NOT A MEDICAL DEVICE. This is a self-care tool. If something hurts sharply, numbs, or refers pain down a limb, stop.
THE REST OF THE LINE This is one of 100 M2 mobility tools - peanuts, wedges, rollers, hooks, scrapers and full-length couch supports, each one sized from the anatomy of a specific tissue. All of them, free: https://www.printables.com/@Mamoo85_4976067
NO PRINTER? A selection of these tools, printed solid and shipped: https://mattmichelstraining.com/myoworks?s=pr