1 / 3
9 Slot Insulin Vial Holder Revolver Style — zdjęcie 1
1 / 3

9 Slot Insulin Vial Holder Revolver Style

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slots for vials are 24mm diameter, 34mm height.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made this and printed for a friend. Printed in ASA-Cf, but PETG would work as well for storage in the fridge.

Slots for vials are 24mm diameter, 34mm height.

Overall diameter is 100mm. Height is 80mm.

Print how you want. No supports needed. I would suggest a lower infill around 15% to save material. I printed at 25% infill and .24 layer height. Time was 5hr 30min.

Tagi