slingfire winchester
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just love this octagon barrel design
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find an adjustable aluminum barrel holder or a Slingfire with an octagonal barrel design.
This started as a small project, but as it grew, I decided to share every minor adjustment and remix from other creators. I hope this saves some time for anyone else working on a similar design.
Need a pen spring and two O-rings:
9.25 x 1.78 mm O-ring for the breech seal
The O-ring I am currently using is AS568-115, but the size requirements are actually quite flexible.
Inside Diameter (ID): 0.674 in (17.12 mm)
Outside Diameter (OD): 0.880 in (22.36 mm)
Cross-Section (CS): 0.103 in (2.62 mm)
Printer:
Flashprint ad3
Rafts:
Barrel wrap might need one
Supports:
Barrel holder needs one for only the protrusion part
Resolution:
0.24
Infill:
15%
Filament brand:
SUNLU
Filament material:
PLA