Plark13 - Pirate Clark (Captain Clark) Backrooms Still Life Dummy 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pirate Clark but to scale with and in the same style as Dummy 13
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
it needs support on only a few parts but they are probably printable without the support.
specifically what i needed support on were the peg leg, the coattails, and most importantly the hat. (i don't think i used support on the collar but if you're unsure then generate support). i used tree supports. don't generate any support on the limb armor pieces as it will be near impossible to remove.
i highly recommend filing the inside of the armor pieces for the arms and especially the right shin because otherwise the pieces will get stuck half way and break when attempting to pull apart or push the rest of the way. i just used a square file that fit perfectly into the pieces. i'm talking about files as in the rough metal rods not computer files.
the pegs of the joints used to connect the coat tails to the belt have a bit that needs to be clipped off so that support doesn't need to be generated on them, but the pegs will also need to be filed down so that they fit in the belt holes
i also attached the latest blend file where i modeled it