R50 pathfinder/qx4 roof tie downs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Should fit 1996-2004 Nissan pathfinder with the slot and crossbar style rack (not the metal tube one) mine is 2004
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The flat version is what I’m using cause it should be stronger but im including an earlier version that I think looks better (if you cleaned it up the model is kinda funky) but not as strong and maybe too thick to fit some things through
Use m6 screws or bolts into the slot nut things in the roof rack rails
I haven’t had a chance to really test these yet just an elastic net holding down a gas can that already fits snug between the crossbars and a light ikea shelf for like 5 minutes max speed was 60km/h. use at your own risk I don’t know how strong they are and any comments would be helpful
I printed mine with 8 walls 30% infill but WHEN these break I’ll try 90-100%. Be mindful if your material will degrade when exposed to the elements on the roof of your car.