Diameter Sensor DS1 for ARTME 3D Extruders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The DS1 diameter sensor is an ARTME 3D® kit for a sensor to measure filament diameters on the ARTME 3D Extruder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The DS1 diameter sensor is an ARTME 3D® kit for building a sensor to measure filament diameters ranging from 1.5 to 2 mm. The kit is supplied with all the necessary components. Only the 3D printed parts need to be printed yourself and some tools are needed.
Here is the online store: DS1 Diameter Sensor – ARTME 3D
Here are the assembly instructions of the DS1: 17.1-Diameter Sensor DS1 – ARTME 3D
This sensor can be used with the original MK3, MK3S and MK3.9 desktop filament extruders. A other firmware is required for operation. The existing firmware has been enhanced for this application by our partner Formaké3D, under the direction of Claudio Dadone. Here you find instructions, how to install the firmware: Wie installiere ich die Firmware? – ARTME 3D
Printer Settings:
All Parts 4 walls, 4 Top and Bottom Layers, 20% Infill.
Print all parts in the same orientation on the print bed to achieve the highest accuracy.
PLA can warp over time. So i reccooment PETG.
Print with slow speeds to achieve the highest accuracy.
The "DS-05 Shutter" component must be printed in black. The color must provide good coverage and completely block out light; translucent colors will not work. If you do not have black on hand, you can—as a last resort—use other dark, opaque colors such as dark blue or dark gray.
Change Log:
26.08.2026: Part "Housing2" reupload (wrong version at first).
27.08.2026: Added Part "Cover1" and "Cover2"
28.08.2026 Added part numbers